中文字幕人成高清视频,国产亚洲综合av,国产在线麻豆精品观看

BYD New Energy Electric Forklift Maintenance-

Electric pallet trucks are driven by electricity, and the movement is controlled by the switch on the handle of the operating arm, and the steering is controlled by the operating arm

It manifests itself as sediment in the electrolyte, and brown material will rise from the bottom of the electrolyte during charging

For a time, hydrogen fuel forklifts have become a new hot spot

For specific classification, please refer to the previous two articles: [Forklift Knowledge] Forklift Classification (V): Class III Electric Transporter [Forklift Knowledge] Forklift Classification (VI): Class III Electric Stacker The third category vehicles are different from the second category vehicles

It is a popular logistics storage truck at home and abroad

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

As a short-distance cargo transportation vehicle, they often carry heavy cargo

Daily maintenance: 1

Electric transport trucks are powered by batteries, driven by DC motors, and advanced by hydraulic power units; they have the advantages of fast operation speed, small size, simple and flexible operation, and low noise

Under normal circumstances, the life of lithium batteries is 3 to 5 times that of lead-acid batteries

The market response was strong and the product was in short supply The coping methods mainly include shot peening of metal structural parts, paint film strengthening treatment, and rust prevention of bolts, nuts and machine pins

BYD New Energy Electric Forklift Maintenance- It is not allowed to operate with a single fork; 4

The noise value of the brake is related to the size

The minimum turning radius of a forklift refers to the minimum distance from the outermost side of the forklift to the turning center when the steering wheel is fully turned when the electric forklift is unloaded, that is, the minimum outer turning radius, and the minimum distance from the innermost side of the forklift to the turning center, that is, the minimum inner turning radius

, Ltd

When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down

A heater should be installed in the cab

The fast-paced lifestyle and work mode have changed people's consumption patterns

The development of its industry is closely linked to the application and breakthrough of new technologies

Therefore, when using an electric transport truck, it must be used in a standard manner, and at the same time, attention must be paid to its maintenance and care to extend its service life

Moreover, when the vehicle is carrying goods, the mast should be tilted backward

The following is shared by BYD forklift editor: In the past two years, I have visited many forklift manufacturers in China (2) Check the entire vehicle for oil and water leakage (3) Check the working conditions of various instruments, signals, lighting, switches, buttons and other auxiliary equipment (4) Check whether the engine is abnormal and whether it is working normally (5) Check the technical condition and tightness of steering, brakes, tires and traction devices (6) Check the technical condition and fastening condition of the lifting mechanism, tilting mechanism, fork frame and hydraulic transmission system When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down

BYD New Energy Electric Forklift Maintenance- 2

Common tonnages of manual trucks are 2 tons/2

Then, a design difficulty of this type of unmanned forklift, namely the hydraulic synchronization problem, is proposed from the two aspects of mechanical structure and hydraulic system

Compared with internal combustion forklifts, they are pollution-free, easy to operate, energy-saving and efficient

, Ltd

When the bending and twisting deformation of the electric forklift mast is too large and it is difficult to correct it by cold pressing, it can be corrected by heating 6 Zhongli also successfully became one of the world's leading storage truck manufacturers

So what are the advantages of electric forklifts? Let's take a look: 1

Mechanism and principle: 1 When the road surface is uneven and has a slope, it will cause serious wear and tear on the wheels and motor of the 3-ton electric forklift

Internal combustion forklift Internal combustion forklifts are generally driven by fuel engines, using fuels such as diesel, gasoline, liquefied petroleum gas or natural gas

Mast: At present, most electric forklifts have adopted wide-view masts, and the lifting hydraulic cylinders are placed on both sides instead of in the middle

The forklift can only be moved with the current generated by the battery, and never with rectified AC to avoid damaging electronic components

0 tons, and is generally divided into empty container forklifts, loaded container forklifts, and container reach stackers

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info