国产综合久久,国产成人免费视,国产免费自拍视频

BYD electric transporter charging flow chart -

There is still a big gap between the penetration rate of forklift electrification at home and abroad Under the background of low-carbon and environmental protection, the electrification transformation and upgrading of the forklift industry has become an inevitable trend of industry development

In the long run, the price of things with technical content must go down

Low maintenance cost: Current electric forklifts all use AC motors, which do not require carbon brushes

The following is a detailed share of its advantages by BYD lithium battery forklift editor: 1

(2) When the direction switch is turned to the reverse position during normal operation, the electric brake function can be executed

Rotate the travel button one after another to move the electric pallet truck backward

If there is no abnormality during the retraction of the fork, after the fork returns to the middle position, in order to lower the center of gravity of the unmanned forklift, ensure the smooth and safe operation, and take into account the efficiency of cargo storage, the loading platform will fall back to 800mm above the ground This is especially true on a slope, otherwise there is a risk of rollover

Do not adjust parts during the operation of the equipment

The wheel groove wear shall not be greater than 10% of the original size

When the chassis tilt exceeds the tolerance, the entire vehicle will issue an alarm signal and prohibit lifting operations Fault 4: Unable to move forward or backward normally Check whether the battery has sufficient power

, which have been widely praised

Find out the warranty period for new vehicles

BYD electric transporter charging flow chart -

Otherwise, it is very easy to cause safety accidents during subsequent use

For example, the forklift is equipped with a 540Ah battery

The system has different driving force modes, which allows the vehicle to flexibly give full play to its characteristics under various loads, improve energy utilization efficiency, and be more environmentally friendly and energy-saving

Warehouse staff have to operate and record at the same time, which may lead to negligence, errors and omissions, and even affect the subsequent work; Improve accuracy: Inaccurate inventory of cargo locations will cause difficulty in finding goods during picking, disrupt picking routes, and thus reduce picking efficiency and accuracy; Improve operational efficiency: If it is impossible to monitor the internal warehousing logistics in a timely manner, and there is a lack of analysis of product data and shipping order data, warehousing management will be difficult and operational efficiency cannot be guaranteed

When heating, the heating area should be minimized, the heating temperature should be lower than 700℃, and it should be cooled slowly to avoid increasing brittleness

Factory operators are basically able to operate the equipment skillfully, but rarely can they solve the faults in the use of the equipment in a timely manner Compared with internal combustion forklifts, they have the advantages of no pollution, easy operation, energy saving and high efficiency This is actually the case when we buy any goods Controlling the operating speed can control the magnitude of the travel motor force The large-capacity battery and ultra-long battery life fully meet the needs of some companies for two-shift operations, and still maintain efficient handling during the peak period of logistics 3 4

When using electric transport trucks, please pay attention to the following matters: 1

They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance

BYD electric transporter charging flow chart -

Management inspection ① Forklifts should be regularly maintained and inspected to prevent fatigue and wear of parts, and to detect potential hidden dangers in time before serious damage occurs

The forklift can only be moved with the current generated by the battery, and never with rectified AC to avoid damaging electronic components

Since most internal combustion forklifts are used in ports, docks and working places, the environment in which they are used is relatively harsh, especially in the port and nursing industry

The lifting device also comes from the motor to drive the hydraulic pump station to push the hydraulic oil inside the hydraulic cylinder to achieve lifting, rising and falling

You should be careful before buying a forklift and do not trust the seller's words to avoid unnecessary trouble and loss

2m, and the maximum lifting height can reach 11 meters

2-week inspection Forklift users should spend a few minutes each week cleaning the machine, paying special attention to removing any entanglements such as silk, linen, and rags around the wheels and axles

Important reminder, new forklift safety standards are coming soon! Safety Technical Regulations for Special Motor Vehicles in the Factory (TSG 81—2022) The new regulations will officially come into effect on December 1, 2022! New regulation changes 1 The regular inspection cycle of forklifts has been adjusted from 1 year to 2 years

For example, the oil disc valve cover is not easy to compact due to the large contact area, which may cause oil leakage

The electric transport truck has an ergonomically designed handle head, which is beautiful and simple

They can be used for stacking, loading and unloading, and handling goods in warehousing, machinery, chemicals, textiles, printing, logistics, and other industries

2*1 Try to turn it slowly

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info