六月丁香婷婷在线,国产视频高清免费,久久国产一二区

BYD Electric Stacker Forklift Operation Video-

Due to the size, the design of the entire car is less playable; 2

It mainly includes inspection before use, inspection during work and maintenance after returning to the warehouse

The larger the minimum ground clearance, the stronger the electric forklift's ability to adapt to the environment

Standardized management and land conservation are the basic principles of our warehouse operations

This solution supports cargo lifting heights of more than 8 meters

The switch on the handle of the manipulator arm controls the movement and the steering of the manipulator arm controls the movement

The oil leaking from the crankshaft rear oil seal will enter the clutch, which will cause the clutch plate to slip or even burn

The battery is the power source of the vehicle and should be charged in time and maintained regularly Development Trend In recent years, the forklift industry has developed rapidly

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

(9) It is prohibited to use a forklift to lift people to perform work at heights to avoid accidents of falling from heights

1*1

When the electric transport truck is not in use, put the forks away and store them in a designated location without affecting other operations

BYD Electric Stacker Forklift Operation Video- The fourth step is to drive the electric forklift slowly forward and allow the forks to fully insert under the cargo

In September 2019, Anhui Heli also invested in the company with the aim of promoting its layout of the lithium battery new energy forklift industry chain

When distributed to each manufacturer, diesel forklifts can be mass-produced, and the price is naturally very low, while battery forklifts are difficult to mass-produce

Check the handbrake and footbrake; 3

As we all know, electric transport trucks and pallets are used together

Hydraulic control The raising and lowering handles on the body panel control the raising and lowering functions

The editor of New Energy Forklift will share it with you below: What are the operating procedures for electric forklifts? 1

So before purchasing a forklift, we need to understand what we are going to use the forklift for

The use of upright motors makes the inspection and maintenance of motors, brakes, etc

Try to turn slowly Currently, the first and second types have been put into normal use, and there are not many forklifts using the third type of electric technology that have been put into the market

BYD Electric Stacker Forklift Operation Video- Stability is particularly important in this equipment However, the voltage rises very quickly, the electrolyte boiling phenomenon occurs earlier than normal batteries, and the charging time is greatly shortened 1

Generally speaking, the cost of large manufacturers will be lower than that of small manufacturers, but due to the brand effect, the price of forklifts will be higher

It is understood that the battery production base of Xin Power now uses the latest fully automated production line, which has the characteristics of high precision, high speed, and high intelligence, to ensure the precise control of intelligent automation during the battery production process and to ensure the consistency requirements of battery production

They are used for automated transportation and can quickly transfer goods from one place to another without manpower

When the electric pallet truck approaches the fixed place where the goods are placed, slowly lower the forks to ensure the stability of the goods

(4) Unmanned and intelligent Affected by the rapid development of intelligent manufacturing and smart warehousing, electric forklifts are also developing in the direction of unmanned and intelligent

Counterbalanced forklift AGV is mainly used for raw material distribution on production lines, transportation of semi-finished products and finished products, and palletizing in warehouses and docks, replacing manual labor for simple and frequent operations, thereby improving work efficiency

The beetle design of the fork reduces the wear of the loading and unloading tools during the loading and unloading process

The gantry is hinged on the front axle support body and consists of a set of parallel steel frames and a sliding bracket for fixing the fork

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

(8) When a forklift is operating, it is prohibited for people to stand around the forks to prevent the cargo from falling and injuring people

When the bending and twisting deformation of the electric forklift mast is too large and it is difficult to correct it by cold pressing, it can be corrected by heating

欧美综合亚洲图片综合区_亚洲欧美日韩成人网_中文官网资源新版中文第二页在线观看_国产精品国产三级国产a

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info