一区在线免费观看,亚洲成人网上,永久555www成人免费

BYD ECB100 Forklifts Distributor

6 operating speed Automatically guiding the maximum speed that an electric truck can achieve when driving under a rated load is an important parameter that determines the vehicle's operating cycle and transportation efficiency

Since most internal combustion forklifts are used in ports, docks and working places, the environment in which they are used is relatively harsh, especially in the port and nursing industry

When storing materials in the shelf area, the action flow is shown in Figure 1-(b)

Tilt the joystick to tilt the mast so that it is in a vertical position

They fully consider the safety and comfort of the driver and combine many ergonomic designs to make it easier for the driver to get through the running-in period

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity Do not start the forklift before the battery is fully charged (5) When using a fork to pick up goods, the fork should be inserted as deep as possible under the load, and care should be taken that the fork tip does not touch other goods or objects

The four categories of forklifts mainly include: Class I electric counterbalanced forklifts, Class II electric ride-on warehouse forklifts, Class III electric walk-behind warehouse forklifts, and Class IV/V internal combustion counterbalanced forklifts

, high-efficiency logistics solutions

It can be divided into electric pallet trucks, semi-electric pallet trucks and manual pallet trucks

Carrying goods within the reasonable load range of the explosion-proof electric transporter has high carrying efficiency and saves transportation time

However, only superb technology is not enough

If it is lower than the standard value, it indicates that the charging voltage is too low

BYD ECB100 Forklifts Distributor

Unlike internal combustion forklifts, electric forklifts are recommended to be used on hard, flat surfaces

As the most important handling tool, forklifts will be subjected to the most demanding operation tests

The birth and rise of forklifts After World War I, mechanical designers, looking to improve productivity in warehouse operations, took inspiration from the advantages of stacking over simply moving goods horizontally and created a platform truck with "high lift

The vehicle uses intelligent rechargeable batteries to increase battery charging time

The prices of electric forklifts on the market range from high to low

4 It takes some effort to choose a high-quality electric transport truck, and it is best to choose a large manufacturer with a well-known brand The following subdivided industry applications are to understand the technical advantages of BYD new energy forklifts

022

Secondly, for a battery forklift, you also need to consider whether the battery is imported or domestically produced, whether it is maintenance-free or a traditional lead-acid battery

Forklift is a non-manpowered tool for transporting goods in warehouses

The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1

It takes a certain amount of time to load and unload goods, and it consumes manpower, is inefficient, and prolongs its usage time

BYD ECB100 Forklifts Distributor

It can provide sufficient electrical energy according to the corresponding instructions

When using lifting equipment to lift a counterbalanced electric forklift, ensure that the lifting equipment is loaded with the required capacity

The push rod under the fork can be electrically adjusted to control the lowering height of the fork

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

Warm reminder: In addition to common models, non-standard customization can also be carried out according to the user's site, environment, cargo, and load to meet the needs of special environment If there is any abnormal sound, perform fault detection in time and do not operate with faults

The electric transport truck has an ergonomically designed handle head, which is beautiful and simple

Turn the accelerator forward to move the forklift forward, turn the accelerator backward to move backward, and return the accelerator to the middle position to stop

The maximum lifting height [3] refers to the maximum vertical distance between the horizontal section of the fork or the upper surface of the lifting platform and the ground; the maximum deflection of the fork end refers to the maximum linear displacement of the fork end in the vertical direction when the fork is at rated load and maximum travel

Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging

High stability coefficient: All mechanical material equipment must make progress in stable design, otherwise it will be difficult to develop in the long run

The three verticals and three horizontals in the "New Energy Vehicle Industry Development Plan (2021-2035)", the "three verticals" refer to pure electric vehicles, plug-in hybrid vehicles, and fuel cell vehicles

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info