自拍偷拍国产,九九久久国产,欧美日韩精品一区二区三区

BYD warehouse forklift maintenance and operation flow chart -

(20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system

The following BYD Forklift Editor will introduce the specific maintenance techniques for electric forklifts

Once a dimension tolerance occurs, the unmanned forklift stops and the system alarms

When storing materials in the shelf area, the action flow is shown in Figure 1-(b)

Do you think this kind of micro-innovation is difficult? And it must be developed when there is market demand

There is no need to add water or acid, which improves the office environment, increases staff satisfaction, and is beneficial to staff stability; 5

If the welding current enters the battery, it will cause damage

When the vehicle starts and the speed increases, keep the accelerator pedal steady

Impact of temperature difference inside and outside the cold storage Cold storage forklifts need to work alternately between low temperature and normal temperature environments

The switch on the handle of the manipulator arm controls the movement and the steering of the manipulator arm controls the movement

A fork-reach-forklift refers to a forklift in which the shelf drives the fork forward and moves it beyond the front wheel to operate

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

Before repair, calibrate the mast of the electric forklift to maintain its inherent straightness

The high-pressure oil first flows into the synchronous motor from the oil inlet channel through the oil pump, and then the hydraulic oil is forced to be divided into 4 paths through the meshing gears in the synchronous motor, supplying oil to each cylinder with equal flow, realizing the synchronization of the hydraulic system

BYD warehouse forklift maintenance and operation flow chart -

Circuit system 1

Power battery products need to be safe, have high energy density and good high and low temperature performance, and they need to have high consistency Diesel forklift: 0

The turning radius of a three-wheel forklift is much smaller

We must understand them clearly and make a good distinction when choosing

If the forklift is also treated as a cloud forklift, the handling volume of unmanned warehousing will increase exponentially

How can the driver accurately insert the cargo when the forklift is raised so high? With an obstructed vision, the driver has to stretch his neck like a giraffe, and still relies on feeling The combined effects of subtropical, humid tropical, marine climate environment and industrial waste gas and dust cause corrosion and damage to the parts of internal combustion forklifts 2

Start Please follow the following sequence, otherwise the forklift will not operate: (1) Make sure the power socket is firmly plugged in

According to the response from Anhui Yufeng Warehousing Business Department, many customers are now calling to inquire about matters such as electric transport truck agents and electric pallet truck wholesales

1 Choose a regular merchant The second-hand forklift market is very complicated In this regard, the customer had tried to install only a single-motor drive axle, but this did not solve the problem because the single-motor drive could not reach the same power level as a traditional internal combustion forklift

BYD warehouse forklift maintenance and operation flow chart - 8Transportation Types Type of raw materials shipped

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; 8

It can be driven electrically, but it requires manual lifting by our operators, which is more convenient and quick to operate

Fault 4: Unable to move forward or backward normally Check whether the battery has sufficient power

A professional forklift operator must also have some professional professional qualities to cope with the handling work of warehousing, otherwise it is easy to cause accidents

At the same time, users are encouraged to install safety monitoring devices on forklifts in use in accordance with the requirements of the new version of the regulations to improve safety

Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model

Before entering the cold storage, please operate the hydraulic and travel movements until the temperature of each component rises before entering the cold storage

Now we are promoting environmental protection everywhere

Check whether the phase change room is clean

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; What should I pay attention to when using an electric transport truck? 2

Compared with internal combustion forklifts, reach stackers have the advantages of easy operation, energy saving and environmental protection

Consider the issue of pneumatic tires and solid tires

Impact of low temperature environment on batteries The lower the ambient temperature, the smaller the actual usable battery capacity

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info