日韩精品最新网址,国产亚洲自拍偷拍,国产黄色在线看

BYD Clamp Forklift Maintenance- Battery charging ① Connect the charger plug to the battery power plug, turn on the charger to charge the battery

They are equipped with a variety of protection devices such as emergency contact safety devices, automatic alarm devices, emergency stop button devices and object detectors, which can avoid injuries to workers and damage to warehouses, other equipment and buildings, and reduce work risks

The vehicle structure is rationally laid out, greatly shortening the turning radius of the vehicle and increasing the actual utilization rate of the warehouse

If the battery is not used for a long time, it should be recharged in time

Use a jack to lift up the entire forklift, then place wood under it and pay attention to safety

The oil pumps and valves of the hydraulic system are all packaged at low temperatures, and the hydraulic hoses are made of low-temperature resistant rubber materials to effectively prevent hose degradation and hydraulic function abnormalities caused by low temperatures; in addition, due to the change of the hydraulic working oil, the viscosity of the hydraulic working oil also changes at low temperatures, so the hydraulic oil pump used for lifting should also use an ultra-low temperature hydraulic oil pump

Fault 4: Unable to move forward or backward normally Check whether the battery has sufficient power

Warehouse work is increasingly inseparable from 3-ton electric forklifts, because the introduction of electric equipment will greatly improve work efficiency and save costs Relatively speaking, battery forklifts are much less powerful than diesel forklifts

Clean the hydraulic oil tank, change the hydraulic oil and clean the filter

When using a reach truck, special attention should be paid to timely charging and proper maintenance of the battery

Battery charging ① Connect the charger plug to the battery power plug, turn on the charger to charge the battery

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

BYD Clamp Forklift Maintenance- The following is shared by the BYD Forklift Editor: In the field of industrial vehicles, BYD has made the greatest contribution to the application of lithium batteries in forklifts

The arc should be as short as possible, the electrode diameter is 4mm, and the current is about 210-240a

In addition to Zhongli, companies such as Noli, Ningbo Ruyi, and BYD Forklift have also made good progress in the electric walk-behind warehouse truck market segment, and are constantly seeking innovative breakthroughs in structural design optimization, load capacity, ergonomics, and easy maintenance

It is widely used in logistics, warehouses, factories, hospitals, schools, shopping malls, airports, stadiums, stations and airports, etc

Easy maintenance: The easier it is to operate and maintain, the less worry and more assured customers will feel

It is also an indispensable tool for our warehouses in recent years When using lifting equipment to lift a counterbalanced electric forklift, ensure that the lifting equipment is loaded with the required capacity Compared with the forklift with extended legs, the front wheels are larger and the outriggers are relatively high

Most of the imported electric pallet trucks have been equipped with power steering systems

Improve corporate image: More environmentally friendly, no pollution, no corrosion, no lead

In general, electric transport truck manufacturers recommend that companies choose nine-legged pallets and Sichuan-shaped pallets

Figure 4 shows the pictures of the 3D virtual prototype and the test prototype

Except for a few warehouse forklifts (such as manual pallet forklifts) that are powered by manpower, the others are driven by electric motors

Electric truck manufacturers recommend that we have many specifications of electric pallet trucks, each with its own characteristics, and choose carefully

BYD Clamp Forklift Maintenance-

If relevant companies want to truly get involved in this field, they must break through some technical bottlenecks, such as battery consistency and power management system (BMS) matching

Check the lighting signal system and replace bulbs and fuses if necessary

When performing fill welding, it is recommended to use DC reverse polarity arc welding 3 Impact of low temperature environment on mechanical system Lubricating oil and grease used at room temperature will also change their properties at low temperatures and are not suitable for use in cold storage environments; specially designed accessories are also required on precision components such as micro-openings, sensors, precision bearings, etc

The most basic question in the inquiry about electric transport trucks should be about the operation of electric transport trucks

When transporting goods on a steeply inclined ground, pay attention to the firmness of the goods on the forklift forks

Ambient temperature: -20℃～+40℃ 4 If lubricating oil is not added regularly, the service life of the electric forklift will be shortened

Considering the needs of warehouse high-rise operations and the height of the warehouse, the lifting height of the forklift should be appropriately considered from the standard configuration of 3

5 meters, 5

Before working every day, you should first check the following safety features: ※ The speaker functions normally

In 2021, China's forklift sales reached 1

欧美综合亚洲图片综合区_亚洲欧美日韩成人网_中文官网资源新版中文第二页在线观看_国产精品国产三级国产a

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info