欧美大交乱xxxx,精品自拍视频在线观看,欧洲精品码一区二区三区免费看

BYD cold storage forklift battery model - The key processes of the entire production line are equipped with the industry's latest production equipment, and are also equipped with self-developed automatic assembly lines, representing the current leading level of equipment technology

5-2 tons, including stacker, transporter, stacker, three-way stacker, and high-bay stacker

When the electric forklift is moving, it is not allowed to turn the azimuth switch to change the driving direction to avoid burning electrical components and damaging the gears Electric truck manufacturers tell you that this is not only for the safety of the driver, but also to maintain the battery of the electric pallet truck and prevent shortening the battery life Make sure to check your surroundings and drive slowly when turning; 2

However, the disadvantage of manual pallet trucks is that they are time-consuming and labor-intensive, and their work efficiency is lower than that of electric pallet trucks

Both walking and lifting are achieved by manpower

Be careful! Unauthorized driving is not allowed

The speed of BYD forklifts can be set to 10KM/H, and the functions of turning speed reduction and high-speed limit are equipped to further ensure the safety of goods and personnel; the humanized design makes the driver more comfortable to drive

Generally, the number of charge and discharge times of forklift lead-acid batteries is about 1,500 times, and the service life is about 3-5 years

The fill welding work starts from the drilled hole to the other end of the crack, and the weld is also welded on the reverse side

Using lithium battery design: Compared with traditional lead-acid batteries, BYD iron batteries have several major technical advantages: low use cost and battery cycle of about 10 years, which are unique advantages that traditional rechargeable batteries cannot match Under normal circumstances, the life of lithium batteries is 3 to 5 times that of lead-acid batteries Plastic pallets can be divided into double-sided pallets and single-sided pallets

BYD cold storage forklift battery model -

Electric truck manufacturers hope that everyone will pay attention to this If there is condensed water on the surface of the vehicle, drying measures must be taken or the condensed water must be dried before entering the cold storage Prevent such accidents from happening again! 1

The development of its industry is closely linked to the application and breakthrough of new technologies

Battery capacity: 80V/700Ah 5 According to relevant logistics industry insiders, forklifts need to have high-intensity performance, are not prone to failure, and can ensure the intensity of sustainable operations

Finally, it is determined whether the design scheme in this paper meets the actual needs

They are not affected by severe cold or hot environments, including working in some environments with poor lighting, etc

Electric transport truck manufacturers remind that nine-legged or Sichuan-shaped pallets should be used, and double-sided Tian-shaped pallets cannot be used

The indoor use of the vehicle is very important

Hydraulic system (1) Lifting hydraulic cylinder, the top of which is fixed to the lifting gantry, controls the lifting or lowering of the fork

If the driving control switch is loose and causes failure, lock it in time

BYD cold storage forklift battery model -

It is used for container handling, such as container yards or port terminal operations

When the electric pallet truck approaches the fixed place where the goods are placed, slowly lower the forks to ensure the stability of the goods

If the battery is damaged or the plate is irreversibly sulfated, it is recommended to return it to the factory for repair to avoid improper repair and safety hazards

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle

This puts higher demands on the product line layout, product design and technological innovation capabilities of related companies, such as achieving lighter weight, better load-bearing capacity and higher cost-effectiveness through lightweight design

The two sets of gantry are connected through the connecting channel steel of the two sets of slides, so that the slides are fixedly connected to achieve mechanical synchronization between the gantry The main technical parameters include: rated lifting capacity, load center distance, maximum lifting height, mast inclination, maximum travel speed, minimum turning radius, minimum ground clearance, wheelbase, track width, etc

When in use, a buffer zone should be built between the cold storage and the charging and loading and unloading areas

If the air gap exceeds the maximum air gap value, it may cause the brake to fail to release, the friction brake pad to burn out, the braking force or holding force to decrease, and even cause a major accident

Principles of forklift selection 1

In a low temperature environment, the battery of an electric forklift will consume more power faster, the charging time will be longer, and the use time will be greatly shortened

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info