欧美精产国品一二三区,99在线国产,91中文字幕

BYD special forklift charging power consumption-

Open the electric lock, move the steering wheel to its moving position, slowly turn the accelerator, and move to the corresponding working area

The Spring Festival is coming soon, and the working intensity and workload of electric forklifts have greatly increased To ease the pressure and anxiety of warehousing and logistics operations, we must first speed up the pace to improve the efficiency of warehousing and logistics work

In this case, the forklift must have good anti-slip capabilities

As the name suggests, a warehouse forklift is a forklift designed for handling goods in warehouses 8

6 operating speed Automatically guiding the maximum speed that an electric truck can achieve when driving under a rated load is an important parameter that determines the vehicle's operating cycle and transportation efficiency

5 tons; 7

The operation is simple and flexible

Moreover, unlike manual trucks and semi-electric trucks, it is equipped with a standing board, which allows you to stand and drive without using manpower

Secondly, when choosing batteries for electric transport trucks, we should beware of counterfeit products

Principles of forklift selection 1

Electric forklifts are also good in terms of driving convenience, but attention should also be paid to maintenance after long-term use

Low voltage protection function to protect the battery and extend its service life

During the unloading process, rapid descent and unloading are strictly prohibited; 12

BYD special forklift charging power consumption-

Core data of this article: Electric forklift production volume, electric forklift consumption volume, forklift market electrification rate An electric forklift is a forklift that uses batteries as the source of power to drive the travel motor and hydraulic system motor to achieve travel and loading and unloading operations

The cold resistance reaches minus 40℃, and it can work normally under high temperature to 60℃

Starting the electric pallet truck: 1

We can also see some in daily scenes

The oil leaking from the crankshaft rear oil seal will enter the clutch, which will cause the clutch plate to slip or even burn

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

Turn the accelerator forward to move the forklift forward, turn the accelerator backward to move backward, and return the accelerator to the middle position to stop

During normal use, pay attention to the insulation of the battery

Then the loading platform is moved up to the corresponding storage height, the photoelectric detection sensor detects that the storage space on the shelf is empty, the fork is extended to the corresponding storage space, the platform is lowered, and the goods are stored on the three-dimensional shelf

The longer joystick greatly reduces the steering force and makes the operation easier

Otherwise, it is easy to damage the ground and forklift wheels, and it will cause accidents such as cargo collapse, damage to buildings and injuries to personnel

(9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading

The steering wheel is designed with a floating structure It is the simplest, most effective and most common loading and unloading and handling equipment in the warehousing, logistics and supermarket industries

The research and development, design, manufacturing and modification of the AGV body were independently completed

BYD special forklift charging power consumption-

Therefore, when companies choose batteries for electric transport trucks, they should pay attention to checking the anti-counterfeiting mark of the product, whether the quality assurance card, maintenance card, etc

Therefore, the "oil-filled" lifting cylinder is used to fill the inner cavity of the cylinder with hydraulic oil, which can effectively prevent the inner wall of the cylinder from rusting

The seals can be replaced

You don't need to measure this data yourself, the electric forklift manufacturer will provide it to you

The push rod under the fork can be electrically adjusted to control the lowering height of the fork

6 In addition, due to the factory's daily expenses, personnel costs, equipment losses, etc

When driving with loads, if the forks are raised too high, the overall center of gravity of the forklift will increase, affecting the stability of the forklift

Electric forklifts are now very commonly used logistics and warehousing equipment Electric forklift manufacturers remind that there are many things that companies need to pay attention to when purchasing a 3-ton electric forklift

They can be seen in warehouses, factories, airports, docks, convenience stores and other places

In other words, for the same rental day, it can work for several more hours or even several times longer than lead-acid batteries; 3

In particular, managers took the lead in illegal operations, and production safety was out of control For the forklift market, electric forklifts are becoming more and more widely covered

Forklift work safety requirements: 1

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info