国产精品揄拍一区二区,日韩大陆av,www久久99

Daily maintenance of BYD side forklifts includes:- The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134

Mast: At present, most electric forklifts have adopted wide-view masts, and the lifting hydraulic cylinders are placed on both sides instead of in the middle

DC motor drive As a relatively cheap driving method, DC drive has been widely used in electric equipment for a long time, but it has some inherent defects in performance and maintenance Clean the mud and other attachments on the outer shell regularly to avoid interfering with heat dissipation

The driver said it was too difficult

The AC drive system makes the electric transporter more responsive, more accurate in control and more stable in operation

The main feature is that in order to overcome the overturning moment generated by the goods, a counterweight is installed at the tail of the forklift

During normal use, pay attention to the insulation of the battery

The motor carbon brush of the DC motor is a spare part, and the economic cost and maintenance economic development cost increase 3

Before starting work each day, a careful inspection must be carried out according to the inspection contents before work can begin; 5

However, one thing that cannot be ignored is that the difference between manual pallet trucks and electric hydraulic trucks is that they are pulled by human power, which consumes a lot of manpower, especially on uneven ground, which is more labor-intensive and has low handling efficiency

Consider the needs of the standard forklift first

Daily maintenance of BYD side forklifts includes:-

The essential characteristics of lithium iron phosphate batteries and their relatively high safety and high efficiency have expanded the application scope and application space of BYD forklifts

When approaching the goods, it should stop first, wait until the position is clear, and slowly align the double forks with the goods

The driving device of the electric transport truck is a battery-powered DC motor to drive the wheels to rotate to move forward and turn

If the driving control switch is loose and causes failure, lock it in time

3 semi-annual inspection ①Apply lubricating oil to the lifting chain and check the wear of the chain

5 tons/3 tons

It plans to increase the promotion and publicity of such products in 2020 to accelerate market penetration

The lifting device also comes from the motor to drive the hydraulic pump station to push the hydraulic oil inside the hydraulic cylinder to achieve lifting, rising and falling

As we all know, the forklift industry is an important part of logistics and warehousing equipment They have the advantages of labor saving, energy saving, environmental protection, high efficiency, safety and reliability, and low noise Increase the stacking height and improve the utilization rate of stacking space

The high-pressure oil first flows into the synchronous motor from the oil inlet channel through the oil pump, and then the hydraulic oil is forced to be divided into 4 paths through the meshing gears in the synchronous motor, supplying oil to each cylinder with equal flow, realizing the synchronization of the hydraulic system

Driving operation: 1

Daily maintenance of BYD side forklifts includes:-

(3) Ensure that the battery pack has sufficient power

The specific measures are as follows: 1

Many electric transport truck accessories are likely to be inferior, with low-end products pretending to be imported, and customers have difficulty distinguishing between the real and the fake

Based on the above problems, this paper proposes a design scheme for a narrow channel side stacking unmanned forklift (hereinafter referred to as unmanned forklift)

(1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward

They are the best choice for weighing goods moving over short distances

It is deeply favored by dealers and enterprises everywhere Through the application of increasingly powerful and constantly upgraded on-board computer hardware and software, electric forklifts have been able to achieve functions such as automatic guidance, automatic driving, optimized routes, automatic operations, vehicle scheduling, safe collision avoidance, automatic wireless charging, and automatic diagnosis

Electric pallet trucks are driven by electricity, and the movement is controlled by the switch on the handle of the operating arm, and the steering is controlled by the operating arm

Braking (1) When the operating arm moves to the uppermost or lowermost end, the forklift is electrically braked won the gold award in the parts category for its high-performance electric industrial vehicle integrated drive key technology research and development, Fanji Technology (Suzhou) Co

Control method: hydraulic control 7

6%; export sales volume was 182,000 units, a year-on-year increase of 175

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info