影音先锋中文字幕影院,精品美女久久久,国产mv久久久

BYD workshop special forklift maintenance and operation process pictures - BYD forklift solutions for food-grade logistics and handling operations: In the field of logistics, food, medicine, and technology have relatively high requirements for logistics equipment and operations When the solenoid, manual reversing valve, or one-way valve is blocked by waste or the sealing ring is worn, causing internal leakage in the equipment, the valve components must be cleaned and the worn seals replaced in time during daily use 7 For specific classification, please refer to the previous two articles: [Forklift Knowledge] Forklift Classification (V): Class III Electric Transporter [Forklift Knowledge] Forklift Classification (VI): Class III Electric Stacker The third category vehicles are different from the second category vehicles

When turning, the electric pallet truck must not be allowed to make a sharp turn at high speed When carrying large objects, the objects block the driver's view, and the forklift should be reversed

Check whether the phase change room is clean

are important factors affecting its price

Loading and unloading issues of electric pallet trucks: 1

As the name suggests, electric transport trucks are electrically powered for lifting and driving

Although electric trucks are superior to manual trucks in terms of configuration, load-bearing, operation, lifting, and work efficiency, manual trucks also have their advantages

The fifth step is to slowly lift the fork

The maintenance method is not difficult

BYD workshop special forklift maintenance and operation process pictures -

Not charging Phenomenon: When the electric stacker is charging normally, the charger light does not turn red, indicating that the battery is not charging

The advantage of electric drive is that it saves a lot of labor and is more efficient than manual labor

The mast of the electric forklift manufacturer has a forward inclination angle of 3°-6° and a backward inclination angle of 10°-12°

Manual pallet trucks are mainly used to carry pallets or directly carry goods, and both walking and lifting require manpower

Is only horizontal transportation required, or is there stacking, picking, or sorting? Is the transported item special (barrel-shaped, such as in the paper industry)? The tonnage of the forklift required, the lifting height, the fork length, and the number of mast levels

From raw materials, to battery cells, module structure, to the overall manufacturing process, and ultimately marketing, BYD can be said to have maintained its core competitiveness in every process

However, battery forklifts have the advantages of environmental protection, less noise, small turning radius, and low operating cost

Since the 1980s, my country's frozen food has gradually developed into the "golden industry" of the food industry, and the demand for low-temperature storage is also expanding

With the development of the economy and the improvement of environmental protection requirements, electric forklifts have developed rapidly, and market sales have increased year by year

Electric transport trucks are no exception

Power Management: Equipped with the world's leading power management system to monitor the battery in real time, perform high-precision calculations on the charge status, ensure that the battery is always working in a safe state, and increase the battery cycle

In a single set of gantry, the two lifting cylinders are connected through the inner gantry to achieve mechanical synchronization

Lifting capacity test: Test different loads, the corresponding maximum pressure of the hydraulic system, the maximum lifting speed, the maximum lowering speed, the shortest time when lifting to the maximum stroke, and the shortest time when falling from the maximum stroke

Electricity meter When the key switch is in the on state, the power meter displays the remaining battery power, with a total of ten grids

BYD workshop special forklift maintenance and operation process pictures -

Good accessories can improve the performance of the entire product: 1

③ Check the wear of the brushes in the hydraulic pump motor and replace any brushes that may not meet the requirements to maintain good contact

Compared with traditional internal combustion forklifts, the engine + fuel + transmission system has become an electric motor + battery + electronic control system, which is mostly used for indoor operations

Stacking forklifts have a gantry, but unlike other lifting forklifts, they do not have a cab, mainly for flexible handling and stacking operations Therefore, the "oil-filled" lifting cylinder is used to fill the inner cavity of the cylinder with hydraulic oil, which can effectively prevent the inner wall of the cylinder from rusting

The application scenario guarantees the confidence of the product

If you directly charge a battery with frozen electrolyte, it may explode

It plans to increase the promotion and publicity of such products in 2020 to accelerate market penetration

If there is no float, check whether the distilled water is level with the bottom of the distilled water bottle

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info