国产精品地址,日本韩国一区二区三区,四虎在线免费看

What is the maintenance content of BYD warehouse forklift?- "Customer-oriented, technological breakthrough" In the face of this challenge, we worked with customers to conduct a comprehensive analysis and evaluation of the power drive of electric forklifts Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power When walking in the warehouse, pay attention to the dangers of forklifts, specifically: (1) When passing through an intersection or crossing a forklift lane, point and confirm; (2) When walking in the warehouse, do not talk on the phone or do other things that affect your concentration; 3

During the unloading process, rapid descent and unloading are strictly prohibited; 12

If it is lower than the standard value, it indicates that the charging voltage is too low

Safety testing plan The system safety inspection of intelligent three-dimensional storage is a prerequisite for the normal operation of the project and is also a key design object

Enterprises must not underestimate the role of the parameter table, which can provide us with comprehensive information If it is insufficient, charge it in time

However, the disadvantage of manual pallet trucks is that they are time-consuming and labor-intensive, and their work efficiency is lower than that of electric pallet trucks

After-sales service is the key, and you must choose a brand with good after-sales service Forklift driver's license, as the name implies, is a necessary professional certificate for forklift drivers

At the same time, the product replacement cycle has been significantly shortened

When the diodes in the two leftmost grids flash alternately, it means that the power is low and the battery needs to be charged The three verticals and three horizontals in the "New Energy Vehicle Industry Development Plan (2021-2035)", the "three verticals" refer to pure electric vehicles, plug-in hybrid vehicles, and fuel cell vehicles 5

What is the maintenance content of BYD warehouse forklift?-

Applicants for the forklift special equipment operator certificate examination must be over 18 years old; 2

This allows the forklift to reach a traction power of about 60kW, which is equivalent to the performance of a 100kW thermal engine, thus achieving an important milestone in performance

The new architecture and edge computing architecture generated by 5G will soon meet the low-time, high-speed operation, and rapid decision-making requirements of driverless cars

Paper tube pallet truck is used for transporting warp beams of water jet looms, and can also be used for transporting paper tubes and paper rolls

Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging

Nowadays, electric forklifts have become the material handling equipment favored by the majority of customers in the industry

The valve components and seals need to be replaced if they are worn and aged

5 meters, 4 High safety factor All mechanical material equipment must make progress in safety design, otherwise it will be difficult to develop in the long run

The cold resistance can reach minus 40°C, and it can work normally at high temperatures up to 60°C

The use of upright motors makes the inspection and maintenance of motors, brakes, etc

If the forklift is not equipped with a safety monitoring device, or the safety monitoring device fails, according to the "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the special equipment inspection agency will determine that the forklift is unqualified

Electric warehouse forklifts, explosion-proof forklifts, container stackers, off-road forklifts and other mid-to-high-end products are also representatives of high technology content and high added value

The electric transport truck has an ergonomically designed control handle, which is convenient for left-handed and right-handed operation and provides comfortable driving

What is the maintenance content of BYD warehouse forklift?-

(5) When using a fork to pick up goods, the fork should be inserted as deep as possible under the load, and care should be taken that the fork tip does not touch other goods or objects

If someone ignores the warning, the operator must stop the counterbalanced electric forklift operation

PU polyurethane wheel: iron core coated with rubber, quiet, good wear resistance, not easy to damage the ground, suitable for painted floors

When welding, the electrode should be inclined 20°-30° in the direction of movement The intensive use of through-type shelves has made forklifts a standard feature in warehousing, and only they can be competent for safe, fast, and green pickup

For operator safety and comfort, the Hyster S2 At present, most companies use this technology

During operation, pull up the handle to release pressure and the fork will go down; pull down the handle to increase pressure and the fork will go up

The larger the load, the more expensive it is

The market price of a 2-ton truck is around 1,000 yuan, making it the most economical and easy-to-use transport tool Now, all-electric transport trucks are widely used in all walks of life

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info