老司机精品影院,国产福利91精品,免费国产一区二区

BYD three-wheel electric forklift charging time calculation method- Rotate the travel button one after another to move the electric pallet truck backward Maximum walking speed: 12km/h 3

We will develop intelligent Internet of Things solutions (IIOT) for intelligent warehousing and logistics systems, realize digital intelligent maintenance and data collection through the application of intelligent hardware equipment and digital products, and apply a unified data management platform and energy consumption analysis system to improve productivity and improve the efficiency of customer machines

, which are mainly used in docks, factories and other workplaces

It is not allowed to lift the cargo to more than 30cm for long-distance travel; 9

Turn on the emergency power off switch

The forklift editor reminds everyone that operating a forklift requires professional theoretical and practical training

Prevent vehicles from carrying people; 7

If the goods are stacked, we also need to consider the size of the shelf and other factors

Electric forklift manufacturers tell you that the smaller the minimum turning radius, the more flexible the electric forklift is

It has become an indispensable means of transportation now

It has the advantages of small size, light weight, high efficiency and long life; 2

Finally, check whether the seals of the electric pallet truck are damaged

BYD three-wheel electric forklift charging time calculation method-

Then, a design difficulty of this type of unmanned forklift, namely the hydraulic synchronization problem, is proposed from the two aspects of mechanical structure and hydraulic system

Regardless of the price of the forklift, this can ensure the normal use of the electric forklift on the one hand, and on the other hand ensure that the battery can be charged normally and quickly after work

In order to reduce the occurrence of failures and extend the service life of the forklift, regular maintenance is very necessary

5 tons/2 tons/2

The weight is gradually increased according to the load capacity of the prototype, and the lifting capacity and high-position side fork tests are performed under different loads

We can recall that when the carburetor was not carefully maintained, was there a situation where the tension spring gasket fell into the intake pipe? This will cause the piston to be scrapped

(6) It is prohibited to pick up goods with a fork at high speed or to use the fork to collide with hard objects

However, with the substantial increase in domestic electric forklift sales in recent years, domestic supporting parts have continuously made technological breakthroughs

Check the tire screws and tires

Overall design of product structure The overall design of the product structure is carried out according to the modular concept, mainly considering three aspects: cargo lifting, cargo forks, and vehicle chassis: Cargo lifting: To facilitate the expansion of the lifting height in the future and reduce the center height of the vehicle, this unmanned forklift uses a telescopic gantry to achieve the lifting and lowering of the cargo platform

If the battery is damaged or the plate is irreversibly sulfated, it is recommended to return it to the factory for repair to avoid improper repair and safety hazards

The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1

One common sign is abnormal noise

BYD three-wheel electric forklift charging time calculation method-

Therefore, once the mast of the forklift is found to be deformed, it must be repaired in time

Usually, electric transport trucks use single-sided pallets, and double-sided pallets are not suitable for use

This allows the forklift to reach a traction power of about 60kW, which is equivalent to the performance of a 100kW thermal engine, thus achieving an important milestone in performance

(9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading

They use batteries as the power source to drive the travel motor and the hydraulic system motor to complete travel and loading and unloading operations

When entering or leaving the work site or driving, pay attention to whether there are obstacles above

Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

Heavy duty design, compact structure, suitable for small space

Daily maintenance is also very simple, and one person can complete the entire process, which has replaced the manual pallet truck to a certain extent

Understand usage requirements There are many types of forklifts

Advantages: Manual trucks are pulled by hand and operated with handles, which is extremely simple, flexible, light in weight, energy-saving and environmentally friendly, and have excellent performance

After the transaction is completed, Anhui Heli will hold 66% of Ningbo Lida's shares and become the controlling shareholder

欧美综合亚洲图片综合区_亚洲欧美日韩成人网_中文官网资源新版中文第二页在线观看_国产精品国产三级国产a

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info