亚洲欧美成人,精品成人免费,91大神在线观看线路一区

BYD Logistics Company Electric Forklifts Which Companies- Overloading is not allowed; 5 It refers to the maximum angle that the mast can tilt forward or backward relative to the vertical state when the electric forklift is in an unloaded state on a horizontal ground

The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

The precautions for cold storage forklifts mainly include the following aspects: 1

The forks can be tilted forward and backward following the hydraulic cylinder

" In the early 1920s, electric reach trucks were introduced, followed by forklifts with gasoline engines and lifting devices Different types have different prices

" Forklifts can generally be divided into three categories: internal combustion forklifts, electric forklifts and warehouse forklifts

The basic operation of an electric pallet truck is to raise and lower the forks, and to move the vehicle forward and backward

The explosion-proof electric transporter has a complete driving system, fast response, precise and easy control, stable operation, and more convenient transportation

3%; among them, domestic sales volume was 151,000 units, a year-on-year increase of 58

In applications that require very low noise, it is recommended to readjust the air gap within the maximum air gap range

The fourth step is to drive the electric forklift slowly forward and allow the forks to fully insert under the cargo

BYD Logistics Company Electric Forklifts Which Companies-

When using an explosion-proof electric forklift, you should pay attention to timely and correct operation, control the forklift's travel speed, and ensure safety

1 When cracks appear in the welding parts of the body of the electric pallet truck, secondary welding should be carried out in time

In order to reduce the occurrence of failures and extend the service life of the forklift, regular maintenance is very necessary

From the above we can see that it is not difficult to find the cause of the abnormal noise of the electric pallet truck, but it requires the driver to have enough patience to solve it

For the forklift market, the popularity of electric forklifts is getting wider and wider

The lifting, lowering and turning of the forklift are driven by the hydraulic system

Use a jack to lift up the entire forklift, then place wood under it and pay attention to safety

The function of the safety valve is to allow the oil to flow back to the oil tank from the return pipe when the oil pressure in the system exceeds a certain value

The above is a detailed tutorial and precautions for operating an electric forklift to pick up goods

03Three

In general, electric transport truck manufacturers recommend that companies choose nine-legged pallets and Sichuan-shaped pallets

During operation, the driving speed can be reasonably controlled to meet different usage rhythms

Forklift license examination requirements: At least 18 years old, in good health, meet the special requirements of the job applied for, have an educational level suitable for the job applied for, have work experience suitable for the job applied for, have corresponding safety and technical knowledge and skills, and meet other requirements specified in safety and technical specifications

BYD Logistics Company Electric Forklifts Which Companies-

The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1

When putting down the load, the mast can be tilted forward slightly to facilitate placing the load and pulling out the fork

, Ltd It is often used in ports, stations, airports, freight yards, warehouses, distribution centers and other places If there is any abnormal sound, perform fault detection in time and do not operate with faults

An electric forklift is a dual-purpose electric forklift with loading and unloading functions and short-distance transportation functions

The wheel groove wear shall not be greater than 10% of the original size

Counterbalanced forklift AGV is mainly used for raw material distribution on production lines, transportation of semi-finished products and finished products, and palletizing in warehouses and docks, replacing manual labor for simple and frequent operations, thereby improving work efficiency

Generally, it is one year or 1,000 hours (whichever comes first)

The rated center distance refers to the horizontal distance from the center of gravity to the vertical forearm of the fork when a standard weight of cargo is placed on the fork of the electric forkliftSZ), Today International (300532 3 The lifting height of an electric truck is generally 200 mm, which is just enough to lift the pallet off the ground, keep a certain distance from the ground, and move freely

Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info