99精品久久久,亚洲国产精品小视频,热99精品里视频精品

When is the best time to charge the battery of BYD high-rise warehouse forklift?-

When using electric transport trucks, please pay attention to the following matters: 1

The constant pressure spring pressure borne by the carbon brush should be normal, and the total area of the carbon brush during the running-in period should not be less than 80%

In order to prevent the glass from fogging, the cab glass should use electrically heated glass, or install wipers, hair dryers and other defrosting equipment to ensure the operator's vision

When the warehouse electric forklift forks goods onto the shelf, it should slow down and pay attention to the height of the double forks

7Work cycle time Automatically guide the electric truck to complete the work cycle time required

It is strictly forbidden to use in blind areas; 9

Where can I find an electric transport truck agent or electric pallet truck wholesaler? With the increasing demand for electric transport trucks, manufacturers, wholesalers, retailers, etc

Battery forklifts are mostly used in indoor places such as warehouses, where the environment changes little, and the corrosion caused by environmental factors is relatively light

After installation, check whether the screws and elastic pins are installed in place and whether the wheel installation position is correct and not loose

Most fuel forklifts are large in size and have a load capacity of more than 1 ton

The overall design of the equipment conforms to ergonomics However, as the country's environmental protection requirements continue to increase, the market demand for diesel forklifts will gradually decrease in the future

, Ltd

The operator should maintain a wide field of vision when driving the counterbalanced forklift to avoid collision with obstacles

When is the best time to charge the battery of BYD high-rise warehouse forklift?- It takes some effort to choose a high-quality electric transport truck, and it is best to choose a large manufacturer with a well-known brand ■ High power The dual-motor integrated design greatly improves the load capacity of the electric forklift

When starting the forklift, maintain a moderate starting speed and do not start too hard

Winter is the peak season for accidents, accounting for about 80% of the accidents throughout the year, and more than 65% of the accidents in winter are caused by operating errors

You only need to find the right position to fix it

As for which truck to choose, companies need to make a purchase based on their actual work Use both hands to push the control handle backward to between 0°-90°

The working pressure of the equipment's overflow valve is not enough and needs to be adjusted To break this situation, we must take the path of differentiated competition

The unmanned forklift moves to the loading point by moving straight, sideways, turning, etc

When using an explosion-proof electric forklift, you should pay attention to timely and correct operation, control the forklift's travel speed, and ensure safety Its characteristics are: the power form is electric, the operation mode is walking, the load capacity is generally less than 3 tons, the width of the operating channel is generally narrow, and it is mainly used for horizontal transportation and cargo stacking, loading and unloading in the warehouse (10) The forklift is steered by the rear wheels, so you must always pay attention to the swing of the rear wheel to avoid turning too sharply, which is common among beginner drivers

When is the best time to charge the battery of BYD high-rise warehouse forklift?-

Therefore, correct maintenance has become more important, and companies and drivers need to pay more attention

The timer and power meter are standard to remind the operator to charge at the right time

1 Excellent hydraulic station, low noise, small vibration, good sealing performance, automatic adjustment of no-load and full-load lowering speed to ensure smooth lifting and lowering

Electricity meter When the key switch is in the on state, the power meter displays the remaining battery power, with a total of ten grids

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same This machine has an ultra-thin body design, stepless speed change, a very small turning radius, a solid body, light and flexible movements, no noise, no pollution, a long working time on a single charge, and reliable performance

The market share of manual trucks and internal combustion forklifts has gradually declined

Slow down early when changing

Since it is pollution-free and has low noise, it is widely used in indoor operations and other working conditions with high environmental requirements, such as medicine, food and other industries

As the control technology of electric forklifts continues to improve, the functions of the products are becoming more complete, and the operation of the equipment is becoming more flexible and convenient

The full load climbing ability of more than 8% makes the operation more common

Many companies will face a difficult choice when purchasing

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info