国产麻豆剧果冻传媒视频杜鹃,欧美成人精品三级网站,日韩在线第二页

BYD counterbalanced battery forklift charging process picture- Compared with traditional internal combustion forklifts, the engine + fuel + transmission system has become an electric motor + battery + electronic control system, which is mostly used for indoor operations 3 The specifications of the forks are designed according to the maximum load of the forklift ※ The brake function is normal

In addition, intelligent robots have begun to enter people's lives, and many companies have begun to use unmanned forklifts to replace manual labor

Below, the editor of BYD forklifts will tell you about some of its requirements during operation and loading and unloading

The arc should be as short as possible, the electrode diameter is 4mm, and the current is about 210-240a

In October 2018, Noli released a lithium-ion electric transport truck named "Tiangang 15" with a rated load of 1,500kg

When the equipment is working, operate the bucket, blade and various control devices slowly, and prohibit high throttle, impact, scraping, shoveling and pushing, etc

The lifting device also comes from the motor to drive the hydraulic pump station to push the hydraulic oil inside the hydraulic cylinder to achieve lifting, rising and falling

(9) It is prohibited to use a forklift to lift people to perform work at heights to avoid accidents of falling from heights

Choice of forklift tires 1

It mainly includes rail electric flatbed trucks, hydraulic press update platform trucks, AGV electric trucks, rechargeable battery delivery flatbed trucks, low-voltage electric flatbed trucks, and roll trucks

BYD counterbalanced battery forklift charging process picture- Another manifestation is that the discharge capacity will decrease significantly

The fork design combines European and American pallet standards

Anti-accidental safety switch The operator faces the fork and the direction of the cargo

As people pay more attention to environmental protection, electric forklifts are gradually replacing internal combustion forklifts

When a vehicle breaks down in the cold storage, it must be moved out of the cold storage as soon as possible and repaired in the buffer zone or maintenance area

8-46 tons, including small tonnage below 5 tons, large tonnage of 5-18 tons, and heavy load of 20-46 tons Power Management: Equipped with the world's leading power management system to monitor the battery in real time, perform high-precision calculations on the charge status, ensure that the battery is always working in a safe state, and increase the battery cycle The Spring Festival is coming soon, and the working intensity and workload of electric forklifts have greatly increased New Regulation Changes 2 Forklifts need to be equipped with safety monitoring devices

When the AGV is driving at low speed with a full load and the deviation level is large, the distance from the instantaneous center to the vertical axis of the AGV is an important parameter to determine the space required for the vehicle's turning operation

If the company has any questions about purchase and safety training, it can consult the electric truck manufacturer

It also reduces the huge workload caused by labor costs

The vehicle has a compact body, flexible movement, and light weight, which is a must-have in warehouses now

The advantages of zero emissions, long battery life, fast hydrogen refueling, and low noise have attracted the attention of forklift manufacturers

BYD counterbalanced battery forklift charging process picture-

Electric forklifts are also good in terms of driving convenience, but attention should also be paid to maintenance after long-term use

In addition, the heat of AC motors mainly occurs in the stator coils of the motor housing, which is convenient for cooling and heat dissipation

If someone ignores the warning, the operator must stop the counterbalanced electric forklift operation

5 Find out the warranty period for new vehicles

Because there are differences in the level of high-tech capabilities in various countries around the world, there are also huge differences in the application of new energy technologies on forklifts

The mast of the reach truck can move forward along the track inside the leg with the lifting device to facilitate forking the goods

Then the loading platform is moved up to the corresponding storage height, the photoelectric detection sensor detects that the storage space on the shelf is empty, the fork is extended to the corresponding storage space, the platform is lowered, and the goods are stored on the three-dimensional shelf

Electric forklift manufacturers tell us that compared with internal combustion forklifts, the advantages of low noise and no exhaust emissions of electric vehicles have also been recognized by many users

Hydraulic control The raising and lowering handles on the body panel control the raising and lowering functions

Open the electric lock, move the steering wheel to its moving position, slowly turn the accelerator, and move to the corresponding working area

Use a jack to lift up the entire forklift, then place wood under it and pay attention to safety

The telescopic fork is designed with a mid-position detection sensor and a travel limit sensor

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info