男人打飞机网站,欧美人禽zoz0强交,成人禁在线观看网站

BYD second-hand electric forklift maintenance requirements- It is suitable for operations in workshops and warehouses

Internal combustion forklift Internal combustion forklifts are divided into ordinary internal combustion forklifts, heavy-duty forklifts, container forklifts and side forklifts

Comparing the take-off and landing speeds, manual trucks are slower than electric trucks and require manual operation, which is time-consuming and labor-intensive

It is also an indispensable tool for our warehouses in recent years

2-week inspection Forklift users should spend a few minutes each week cleaning the machine, paying special attention to removing any entanglements such as silk, linen, and rags around the wheels and axles

Violators will be severely punished

At present, due to the large number of people, you need to add the editor's personal WeChat to invite to join the group

At the same time, users are encouraged to install safety monitoring devices on forklifts in use in accordance with the requirements of the new version of the regulations to improve safety

(9) It is prohibited to use a forklift to lift people to perform work at heights to avoid accidents of falling from heights

2 5 If the vehicle has a braking function, the kinetic energy during deceleration can be recovered

Electric forklift manufacturers adjust speed, which is relatively complicated, has high requirements for AC operation, must be used for a long time, and the price is also high

BYD second-hand electric forklift maintenance requirements-

If the lifting height of the fork does not reach the required height, add hydraulic oil

Low temperature resistant grease In order to prevent the hardening phenomenon caused by low temperature, the working hydraulic oil uses special hydraulic oil that changes its viscosity characteristics under low temperature environment, and the lubricating grease should also be selected with good low temperature characteristics

※ The brake function is normal

The shedding of active material on the positive plate is a common problem on all-electric truck batteries, which can cause a short circuit in severe cases

DC motor drive As a relatively cheap driving method, DC drive has been widely used in electric equipment for a long time, but it has some inherent defects in performance and maintenance

0 tons, and is generally used for outdoor operations in docks, steel and other industries with heavy cargo (5) Choose the correct driving direction and control the speed at an ideal level The difference is that all operations of a fully electric pallet truck are controlled electronically, without the need for manual operation When the cargo width, length, and height exceed the limit, an alarm signal will be issued; ② The loading platform is designed with sensors to determine whether there is a pallet and whether it is empty or full; ③ In the hydraulic system, a pressure detection sensor is designed The battery box cover is easy to open, making it convenient to add distilled water or electrolyte to the battery

At present, most lithium battery forklifts are still using lead-acid battery bodies, which do not give full play to the small size and high specific energy characteristics of lithium batteries

It has low electrostatic induction power, strong anti-interference ability, and stable and reliable operation

More environmentally friendly, no corrosion, lead-free, safe to use, and can be recycled even when its service life is up

BYD second-hand electric forklift maintenance requirements- Regardless of the brand of electric forklift, if it is a lithium battery, it is necessary to regularly check whether the electrical socket can be used normally and whether the battery casing is damaged

The following table shows the relevant parameters of the electric pallet trucks: Main components: 1

? AC drive system, stepless speed regulation, safe, silent, emergency reverse device/emergency brake switch

If you still have questions, you can consult the electric transport truck manufacturer

It is the simplest, most effective and most common loading and unloading and handling equipment in the warehousing, logistics and supermarket industries

The double-sided pallet is made of co-polypropylene, which cannot be formed in one go and must rely on later welding

Regardless of the price of the forklift, if the electric forklift has been working in a low temperature environment for a long time, it should be placed in a warm indoor environment for a period of time before charging it indoors

Through the application of unmanned forklift, we can realize the handling of heavy goods, effectively speed up work efficiency, and well solve the problems of increasing the amount of logistics information and the high intensity of labor relations in manual handling in my country's industrial production

Electric transport forklift manufacturers tell us that generally speaking, transfer forklifts can be divided into manual, semi-mechanical and fully electric

The operator must stay away from non-staff members in the counterbalanced forklift's working area and immediately issue a warning if there is any danger

Among them, the minimum stacking channel width refers to the minimum channel width corresponding to the forklift when it can stack in the shelf channel

Impact of temperature difference inside and outside the cold storage Cold storage forklifts need to work alternately between low temperature and normal temperature environments

Now, the electric forklift manufacturer will tell you what are the characteristics of the full-electric transport truck

欧美综合亚洲图片综合区_亚洲欧美日韩成人网_中文官网资源新版中文第二页在线观看_国产精品国产三级国产a

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info